Looking for a simple and inexpensive way to inject vitality to your kitchen? Of colored glass embedded in your cabinet doors may well be the ideal solution. Follow these steps to create false and windows and add a touch of whimsy to your decor. Before installing moldings on your panels, make sure that they harm their opening. In some cases, hinges half recovery can fix the problem. Otherwise, ornament only the center of a decorative panel. Paint for false stained glass: identifies embossed imitation of lead paint for transparent glass and metal-based solvent.

Step 1

Determine the placement of the glass on the door panel. Make sure the width of the decorative molding is higher by at least 1/2 cm (1/4 inch) compared to the size of the glass to keep it in place. Measure the size of this location to cut the glass of the appropriate size. To cut the boards, drill holes at each corner with a wood bit 3/4 inch. Insert the blade of the jigsaw and cut holes in the contour plot.

cabinet-doors

Step 2

Proceed to finishing of the outer contour of the front of the door with a top provided with a lock notching 1 3/8 inch.

Step 3

On tracing paper, draw a sketch of reasons you want to create. Then attach this sheet on your work surface and place the glass top. To create the plots cord lead, use of the ring embossed imitation lead. To draw nice straight lines, help you with a wooden stick placed on two support points higher than the glass. Run continuous gestures. Let dry according to manufacturer’s recommendations.

Step 4

Use a fan brush 1 inch and the transparent paint for glass and metal-based solvent to color patterns. Always work from the top of the surface to be painted so as not to drop on the other colors. Proceed by slow movements and in operation to avoid going the same place twice. Let dry according to manufacturer’s recommendations.

Step 5

Apply clear silicone glue along the frame inside the panel and drop it the glass. Squeeze it to make sure it is secure.

Step 6

Glue the moldings on the front panels with all-purpose glue like no more nails. Solidify all with finish nails from 3/4 inch. They help keep the glass in place.