The panel wall is a frame from the geometric shape. On this frame, are mounted boxes covered in paper very similar to the traditional Japanese panels . Behind the panel, is placed a system of lighting that creates an ambient glow. panel Japanese is, typically, constructed to hide a wall or a wall just aesthetic and decorative little, or to hide the passage of pipes decidedly unattractive. It could also serve to give more light to a bath or to another local, but also to isolate a corner toilet in a room or to separate environments. They also give you the opportunity to adopt a style decor Japanese, characterized by simple lines, geometric furniture and blacks and green plants. In this guide we will see how to build a panel Japanese original and extremely fascinating.

The size of it is to be Japanese panel, which will be mentioned in this guide, are only an indication, because you’ll be having to adapt to those of your local. techniques used are quite simple and require the joint in the middle of the wood. Even installing the electrical system will be very easy.


The first step: take precise measures and draw a picture on graph paper. structure is made ​​up from the bottom which is covered and from the top of the housing boards tongued half wood and assembled as the windows. In addition to the laths, the upper part includes a frame movable used as a door that will allow you to access the hidden wall to inspect or to perform the electrical work. The structure differs by a few centimeters from the wall, in order to improve the isolation of the local, in particular when the wall is oriented to the north. You also have to say that the structure is secured between two uprights, bolted to the wall at both ends. And the height of the wall to determine the length of these strips. When the width of the wall provisional exceeds 1.50 m or 2 m, it is advisable to add one or more additional central uprights so as to confer a good stability to the whole. Before taking the measures, would agree to establish your points of reference on the spot, directly by placing the strips that will form the uprights.

To determine their position on the wall, I recommend you use a plumb line . The lead wire will be used to draw the vertical line will be marked with chalk. The project should be carried out on paper graph to better assess the number and size of the frames in proportion to the local. To calculate the height of the central cross member , a strip and positioned with the aid of a surface gauge, you will have to draw the notches in mid wood to be carried out on the side pillars for the assemblies .