Very often to perform the chores we prefer to rely on the hands of professionals to get a perfect job, but in some cases paying high figures. However if these jobs are not very complicated, we will try to realize them with our hands making help from a guide. In the next steps, in particular, we will see how to create a small greenhouse.

small greenhouse

If we do not have a garden, but we keep to the survival of our vessels, we have two options: buy a small greenhouse and spend money, or retrieve an old shelf and achieve the same result with a minimum of effort . It will be enough to coat the shelf, preferably of wood, with a heavy cloth, pinning on the structure on all sides except the bottom from where it can pass the air. At this point, with a scissors open a passage from the bottom upwards, which will serve to enter inside and to water the plants when necessary. On the end of the passage we realize the little holes equally spaced , using a nail heated with a lighter, and we pass a strap through the holes created, passing from one side of the opening to close it and reopen it when we want.

If we plant along the enclosure walls, protect them will be very easy. Proctorial of barrels of medium thickness, affiliation one end into the ground deep enough to prevent them from flying away and create a hut around the plant, placing them in a radial pattern. We tie the ends, between them, with a strap as those used to support the plants and tilt the tip towards the wall of the hut. We plant a nail in the wall and tilted assure the structure using another strap. At this point, we take a sheet of plastic and thick ambassadorial to the structure using the nails . You will need to be careful to protect the right side between the wall and the greenhouse in order to prevent the wind infiltrate and obstruct the work.

For flower beds that do not enjoy the protection of a wall the mechanism will be very similar. We plant the canes in a circle and join the upper ends assuring her with a lasso. To give more stability to the structure will also be useful insert a rod straight from the center of the flower upwards and form of the sleepers in the upper part perpendicularly joining the reeds in the opposite position. At this point we can lay the cloth around, pinning him to the barrel, and making sure it is straight. It is important to remember that more structure is low will be more protected from the wind.