The installation of blinds allows you to control the hot sun in the afternoons in the summer sometimes suffocating, with the possibility of adjustment that can bring shade and coolness . The installation of blinds can be made ​​quickly and without the intervention of specialists, carefully following the simple steps . Here’s how to install blinds.

The blinds installed within the frame of a window allow you to hang without rods or extension cords. The blind can be opened and closed without problems curtain wire or glass of windows. The adjustment in fact takes place with a translational motion up to 180 degrees of inclination that allows the concealment of light in a gradual manner from very small, until obscuration total and vice versa.

Before purchasing the blinds, take the measure of the window opening, after which it calculates the necessary height that goes from the top of the compartment up to rest on the window sill. It ‘also important to check the distance between the sill and the same tent of wire to avoid that, capable of catching when being unwound. Having said that, you can proceed with the installation . It begins with the attachment of a rod on the top of the window opening with expansion anchoring screws (included in the package). The Venetian, is then screwed on it with wood screws and fixing brackets of metal, so as to remain well anchored.


After assembly, we must remove the lock that holds together the Venetian blind, in order to make the tests to check whether everything is carried out according to the instructions included in the kit The Venetian has laterally two strands of rope that, if tuned in parallel allow the translation of the fins outwards or inwards and are used to fine-tune the beam of light that will be used. If the head longer than the rope is pulled of us, the blind closes or opens fully preventing or allowing light to enter the assembly of the Venetian is so easy and you can run it all, it is important not to mistake the measure when you buy because in its simplicity it is also always a means for adjusting the light which requires a minimum of precision, both essential for the proper functioning that from the point of view of aesthetics of a room of the house.